Power Grinder grain mill motor

$259.00

The Power Grinder grain mill motor is a single phase, 400W, AC Electric Motor compatible with either 110 Volt current or 220 Volt current.  The Power Grinder grain mill motor was designed specifically for the beer brewing grain mill application, perfect for all grain mills!

NOTICE: The Power Grinder grain mill motor does not come with a cord.

Clear
SKU: GMM Category:

Description

The Power Grinder grain mill motor is a single phase, reversible, 400 Watt or 700 Watt AC motor which is compatible with either 110 Volt current or 220 Volt current at either 50 HZ or 60 HZ.

Weighing in at 28 pounds for the 400 Watt 1/2 HP model, and 46 pounds for the 700 Watt 1 HP model, the Power Grinder grain mill motor – offered exclusively by All American Ale Works ® – is a BEAST!

The Power Grinder motor and gear reduction housings are constructed of molded cast aluminum, and are a single combined unit, completely enclosed to eliminate the possibility of dust and moisture intrusion.

Designed and manufactured specifically for the beer brewing grain mill application, the power Grinder grain Mill motor features a six wire coil wrap, which generates excessive torque, while providing for compatibility with either 110 Volt current or 220 Volt current.

With a heavy duty start capacitor, and a heavy duty run capacitor, the Power Grinder grain mill motor has more than enough torque for any grain mill application.

The 1/2 HP grain mill motor package includes the Power Grinder grain mill motor, and the following Lovejoy components:

  • a Lovejoy 22mm L075 sintered iron jaw type shaft coupler for the motor shaft
  • a Lovejoy L075 rubber buna spider, which provides cushioning between the two shaft couplers, preventing metal to metal contact
  • a Lovejoy L075 sintered iron jaw type shaft coupler for your mill shaft.

As part of the checkout process when ordering, you will be prompted to select the appropriate bore size for your mill shaft coupler, usually  1/2″ (with or without keyway), 3/8″, 3/4″ or 10mm.

As an official Lovejoy distributor, All American Ale Works can special order any shaft coupler components necessary to connect your grain mill to the Power Grinder grain mill motor.

Please contact us if you have any questions about the Power Grinder grain mill motor, or any shaft coupler components.

NOTICE: The Power Grinder grain mill motor does not come with a power cord.

Please see the wiring suggestions linked below for power cord and wiring recommendations.

 

Click here for Wiring Suggestions

Additional information

Weight 28 lbs
Dimensions 16 x 11 x 10 in
Motor Speed

180 RPM, 240 RPM